Description:
A two-component, cement-acrylic based, polymer emulsion modified, super elastic waterproofing mortar.
Reference standards:
TS EN 14891 / April 2013
Waterproofing products for non-exposed areas – Liquid applied waterproofing kits for roofs – Requirements and test methods CE
Advantages:
- Safe use in wet areas, terraces, swimming pools, and water tanks
- Can be coated with ceramic and similar materials
- Suitable for drinking water
- Super elastic structure for temperature changes
- Easy and convenient application
Usage area:
It is used as a ceramic sub-waterproofing material in all buildings, especially in wet areas such as balconies, bathrooms, toilets and kitchens, on terraces, in swimming pools and water tanks.
- The surface should be clean, damp, smooth, and sound. Significant irregularities and holes on the surface should be repaired with CORION REPAIR FIX 03 repair mortars at least 24 hours before applying CORION SUPER FLEX 3003.
- To ensure continuity of the waterproofing, vertical and horizontal corners should be chamfered with CORION REPAIR FIX 03 repair mortars.
- Highly porous surfaces such as raw concrete or cement plaster should be wetted with clean water and left until the water layer disappears, keeping the surface moist.
Application conditions:
• Ambient temperature between +5°C and +35°C.
• Application should not be done in very hot weather conditions.
• Should not be applied on frozen or surfaces under the risk of freezing.
Application Tools:
Hand mixer, brush, trowel
Consumption:
3,0-3.5 kg/m2 (for 2 mm application thickness)
- Use appropriate safety equipment (mask, gloves, goggles).
- Protect your eyes and face.
- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- For detailed safety information, please read the Material Safety Data Sheet.
- Only the mixing liquid should be used for the mixture, and water should not be added under any circumstances.
- Foreign materials must not be added. Expansion joints on application surfaces should not be filled with CORION SUPER FLEX 3003. Continuity of insulation at these points should be ensured with expansion joint insulation tapes.
- In wet volume applications, moving points and vertical and horizontal corners should be supported with corner insulation tapes.
- Surfaces where CORION SUPER FLEX 3003 is applied should be protected from direct sunlight, air currents, and freezing for 3 days. If necessary, the surface should be wetted and kept moist.
- In surfaces that may be subjected to mechanical impacts, a protective layer such as ceramics should be applied over CORION SUPER FLEX 3003.
- Ceramic coating or other similar coatings should not be applied for 3 days after the CORION SUPER FLEX 3003 application.
- All tools used after the application should be washed with water before they are completely dry.
Corion Construction Chemicals shall not be responsible for any application errors that may occur if the product is used for purposes other than its intended use or if the above-mentioned conditions are not followed.
The specified times are valid for surface and ambient temperatures between 20-23°C. The time will be longer at low temperatures and shorter at high temperatures. Corion Construction Chemicals shall not be responsible for any application errors that may occur if the product is used for purposes other than its intended use or if the recommended application conditions and guidelines mentioned above are not followed.