Description:
Polymer emulsion modified, cement-based, dual-component, crystalline waterproofing product resistant to negative and positive water pressure.
Reference standards: CE
Advantages:
• Resistance to negative and positive water pressure
• Ability to transfer to the capillary gaps of cementitious surfaces
• Suitable for potable water
• Easy and comfortable application
Usage Area:
Used as a waterproofing material in all indoor and outdoor structures, especially in foundation and basement walls, water tanks, and swimming pools.
- The surface should be clean, dry, smooth, and sound. Any significant irregularities or holes on the surface should be repaired with the CORIONREPAIRFIX03 group repair mortar at least 24 hours before applying CORION CRY 2K 3303.
- Expansion joints on the application surface should not be filled with CORION CRY 2K 3303; instead, expansion joint sealing tapes should be used to ensure the continuity of waterproofing.
- Vertical and horizontal corners should be rounded with CORION REPAIR FIX 03 group repair mortar to ensure the continuity of waterproofing.
Application conditions:
• Ambient temperature between +5°C and +35°C.
• Application should not be done in very hot weather conditions.
• Should not be applied on frozen or surfaces under the risk of freezing.
Uygulama
•CORION CRY 2K 3303 3 kg’lık sıvı bileşen 6,0 kg’lık karışım suyuna ilave edilmeli ve 25 kg’lık CORION CRY 2K 3303 toz bileşeni ile temiz bir kapta düşük devirli bir mikser yardımı ile homojen bir kıvama gelinceye kadar yaklaşık 2-3 dakika karıştırılmalıdır. Fırça ile tüm yüzeye en az 2 kat olarak uygulanmalıdır.
•Her bir katın uygulaması bir öncekine dik doğrultuda yapılmalıdır.
•Katlar arasında en az 6 saat beklenmelidir. Takip eden kat uygulamasının, bir önceki kat uygulamasından 12 saat veya daha sonra gerçekleşmesi durumunda, yüzey uygulama öncesinde tekrar nemlendirilmelidir.
Application Tools:
Brush, roller, trowel.
Consumption:
2,5-3 kg/m²
• Use appropriate safety equipment (mask, gloves, goggles).
• Protect your eyes and face.
• In case of eye contact, immediately rinse with plenty of water and seek medical advice.
• For detailed safety information, refer to the Material Safety Data Sheet.
• Not suitable for application on wood, chipboard, plywood, and metal surfaces.
• Not recommended for application on direct brick, aerated concrete, and poorly plastered surfaces.
• Not suitable for terrace and roof insulation.
• Not recommended for facade wall insulation.
• Not suitable for use in deep tanks over 6 meters in depth or foundations exposed to groundwater below 6 meters.
Package
25 kg Kraft bag / 3 kg plastic
Color – Grey
Shelf Life
• In dry and cool environments that are not exposed to direct sunlight, the shelf life is 12 months from the date of production.
• Storage temperature should be between +5°C and +30°C.
• When not in use, the package should be tightly closed.
• Packages should be protected from frost.
Corion Construction Chemicals shall not be responsible for any application errors that may occur if the product is used for purposes other than its intended use or if the above-mentioned conditions are not followed.
The specified times are valid for surface and ambient temperatures between 20-23°C. The time will be longer at low temperatures and shorter at high temperatures. Corion Construction Chemicals shall not be responsible for any application errors that may occur if the product is used for purposes other than its intended use or if the recommended application conditions and guidelines mentioned above are not followed.